dvd-hq.info Forum Index dvd-hq.info
DVD & video forums
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

external monitor problem

 
Post new topic   Reply to topic    dvd-hq.info Forum Index -> Editing
View previous topic :: View next topic  
Author Message
compusic



Joined: 22 Sep 2006
Posts: 35

PostPosted: Mon 4 Jun 2007, 3:35    Post subject: external monitor problem Reply with quote

This problem is a little difficult to describe, so be patient please.

the system is MAC OS X, Final cut pro 5, Blackmagic Multibridge Extreme with composite video out linked to the composite video in of sony monitor.

the project setting of fcp is DV pal with anamorphic option checked. what the monitor window of fcp shows is correct. but on the sony monitor ( set to 16:9 ratio), there's a chopping all around the frame, just like the overscan effect of a 4:3 frame. I have compared with the same video content without the anamorphic option checked in fcp5, and set sony monitor to 4:3 ratio, the same content of video is chopped. that's to say, if I output a anamorphic video, and set sony monitor to 4:3 ratio instead of 16:9, it looks the same as the video with 4:3 frame ratio--- the same content is chopped.


then I do another test, I output the anamorphic video to sony hvr-m10c digital tape recoder through dv-link, on it's lcd display, there's also a chopping. then let the recoder record some video and imported back into fcp5, the frame content is right, there's no chopping. It seems the datas are there always, but some are not displayed.

then here comes a conclusion---even for anamorphic video, there's overscan. can anyone confirm this? since I thought before that it should be like the 16:9 hdv without overscan.
Back to top
View user's profile Send private message
RMN
Site Admin


Joined: 04 Feb 2003
Posts: 587
Location: Lisboa, Portugal

PostPosted: Mon 4 Jun 2007, 19:10    Post subject: Reply with quote

All TV sets (4:3 or 16:9) chop off a bit of the image on each edge of the screen (those areas sometimes have poor quality, visible timecode marks, etc.). Video monitors do the same, to give you an idea of the "safe area" (the area that will be visible for sure).

Most professional monitors have an "overscan" button that you can press to display the entire image.

RMN
~~~
Back to top
View user's profile Send private message Send e-mail Visit poster's website
compusic



Joined: 22 Sep 2006
Posts: 35

PostPosted: Wed 6 Jun 2007, 1:04    Post subject: Reply with quote

thanks for reply.

but when anamorphic video is displayed on the 4:3 monitor, it's letter-boxed. so there's enough room above and below the video. even so, there should be chopping?
Back to top
View user's profile Send private message
RMN
Site Admin


Joined: 04 Feb 2003
Posts: 587
Location: Lisboa, Portugal

PostPosted: Wed 6 Jun 2007, 4:01    Post subject: Reply with quote

Yes. The borders of the image are not cut due to "lack of screen space" (if that was the issue, the TV would simply shrink the whole image). They are cut because those areas often have sync problems (wavy edges), lower quality, visible timecode marks, etc., that you would not want the TV viewers to see.

RMN
~~~
Back to top
View user's profile Send private message Send e-mail Visit poster's website
compusic



Joined: 22 Sep 2006
Posts: 35

PostPosted: Fri 8 Jun 2007, 3:53    Post subject: Reply with quote

thanks for your patient explaination.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    dvd-hq.info Forum Index -> Editing All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Powered by phpBB © 2001, 2002 phpBB Group